Chord Hugo 2 User Manual

Chord Electronics
Hugo 2 | User manual
3
2 Introduction
This manual describes all the features of the Hugo 2 DAC/headphone amplifier and contains important
warranty, safety and usage information.
2.1 Safety
• Do not allow the device to come into contact with water or liquids.
• Do not spray cleaning products onto the device. Use a clean microfibre cloth to clean the casework.
• A further safety document is included in the box.
• The device does not contain any user-serviceable components. Do not attempt to open, dismantle or
apply internal third-party devices to it. Doing so will void the warranty.

Chord Hugo 2 Specifications

General

Product color	Black
Frequency range	20 - 20000 Hz
Output impedance	0.025 Ω
Channel separation	135 dB
Peak power per channel	- W
Signal-to-Noise Ratio (SNR)	126 dB
Total Harmonic Distortion (THD)	0.0001 %
Battery life	7 h
Charging time	4 h
Number of batteries supported	2
Headphone connectivity	3.5mm
Cables included	Micro-USB

Weight and Dimensions

Depth	130 mm
Width	100 mm
Height	21 mm
Weight	450 g