User Instructions
Section 10
Index ________________________________________________________
Alarm
• latching 17
• Overtemperature 13, 14, 17
• Relay Action 17
Cabinet 2
Cavitation 2, 21
Closed-loop Heat Exchanger 1
Control Output #1 (Heat) 13, 14, 28
Control Output #2 (Cool) 13, 14, 28
Control Setpoint 13, 14, 15
Control Voltage Fusing 11, 12
Controller
• Temperature Controller 3, 9, 13, 14, 19,
23, 29
Cooling Chamber 1
Cooling Control 28
Cooling Solenoid 20, 27, 28
Cooling Water Valve 31, 32
Diagnostic Functions 13, 21
Diagnostic Indicators 3, 13, 19, 21, 28, 29
• Low Water Pressure 3, 13, 19, 21, 28
• Over Temperature 3, 13, 19, 21, 22, 28
• Pump Overload 3, 13, 19, 21, 22, 28
Draining 24
Electrical Installation 11
Fusing 11, 12, 31
• Control Voltage 11, 12
Heat Exchanger 2, 27
• Closed-loop 1, 2
• Open-loop 1
• Removal/Replacement 27
Incoloy-sheathed heater 1, 2
Indicators
• Diagnostic 3, 13, 19, 21
• Low Pressure 3, 13, 19, 21, 28
• Overtemp 3, 13, 19, 21, 22, 28
• Pump Overload 3, 13, 19, 21, 22, 28
Low Pressure Switch 2
MENU selections 13-16
• Control PAGE 15
• Display PAGE 15
MENU value 16
Motor 30, 31-32
Motor Contractor 29
Motor Control 26, 28, 29
Motor Vent Line 26
Open-Loop Heat Exchanger 1
Operating Mode 16
Operating Temperature 1, 2
Output Relay #3 17, 28
Output Relay #4 17, 28
Overtemperature Indicator 13, 21, 22, 28, 31
Power requirements 1
Pressure gauges 3, 13, 19, 29
Pressure Indicator
• Low water 13, 19, 21
Pressure Relief Valve 1, 2, 5, 6, 8, 9, 19
Process Temperature 13, 14
Pump 2, 6, 8, 9, 21, 24, 26, 28-32
• Pump Indicator Light 18
• Removal/Replacement 26
• Rotation Check 10, 18, 26
Pump Cavitation 2, 21
Pump Housing 1, 2, 6, 9, 24, 25, 26, 27
Pump Motor 5, 6, 8, 9, 20, 21, 24-29, 31-32
• wires 24
Pump Reset Switch 22
39
To Next Page
Loading...
Need help?
General
