The ignition can be placed in the following positions:
OFF
• The engine is stopped.
• Some electrical devices are available.
ACC
• The engine is stopped.
• Some electrical devices are still available.
ON/RUN
• Driving position.
• All the electrical devices are available.
START
• Start the vehicle.
The engine only runs in the ON/RUN ignition position or
from a remote start request.
In case the ignition switch does not change with the push
of a button, the key fob may have a low or dead battery. In
this situation, a back up method can be used to operate the
ignition switch. Put the nose side (side opposite of the
emergency key) of the key fob against the ENGINE
START/STOP button and push to operate the ignition
switch.
Keyless Push Button Ignition
3
GETTING TO KNOW YOUR VEHICLE 27
To Next Page
Loading...
