EasyManua.ls Logo

Chrysler PACIFICA 2018 - Remote Starting System - if Equipped; How to Use Remote Start

Chrysler PACIFICA 2018
716 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REMOTE STARTING SYSTEM IF EQUIPPED
This system uses the key fob to start the engine
conveniently from outside the vehicle while still
maintaining security. The system has a range of
328 ft (100 m).
The Remote Starting System also activates the Climate
Control, vented seats (if equipped) in temperatures above
80° F (26.7° C), and the optional heated seats, and optional
heated steering wheel in temperatures below 40° F (4.4° C).
NOTE:
The vehicle must be equipped with an automatic trans-
mission to be equipped with Remote Start.
Obstructions between the vehicle and key fob may
reduce this range.
How To Use Remote Start
Push Remote Start button on the key fob twice within
five seconds. Pushing the Remote Start button a third
time shuts the engine off.
To drive the vehicle, push unlock button, and place the
ignition in the ON/RUN position.
With remote start, the engine will only run for 15
minutes (timeout) unless the ignition key is placed in the
ON/RUN position.
The vehicle must be started with the key after two
consecutive timeouts.
All of the following conditions must be met before the
engine will remote start:
Gear Selector in PARK
Doors closed
Hood closed
Liftgate closed
Hazard switch off
Brake switch inactive (brake pedal not pushed)
Battery at an acceptable charge level
PANIC button not pushed
System not disabled from previous remote start event
Vehicle alarm system indicator flashing
Ignition in STOP/OFF position
Fuel level meets minimum requirement
3
GETTING TO KNOW YOUR VEHICLE 29

Table of Contents

Other manuals for Chrysler PACIFICA 2018

Related product manuals