3. Remove the cap from the valve stem
and then screw the fitting at the end
of the Sealant Hose onto the valve
stem.
4. Uncoil the Power Plug and insert the
plug into the vehicle’s 12 Volt power
outlet.
NOTE: Do not remove foreign objects (e.g., screws or nails)
from the tire.
Injecting Tire Service Kit Sealant Into The Deflated Tire:
1. Always start the vehicle before turn-
ing ON the Tire Service Kit.
2. Ensure the Mode Select Knob is to the
Sealant Mode position.
3. After pushing the Power Button, the
sealant (white fluid) will flow from
the Sealant Bottle through the Sealant
Hose and into the tire.
NOTE: Sealant may leak out through the puncture in the
tire.
482 IN CASE OF EMERGENCY
To Next Page
Loading...
