push back to the desired position and release the lever.
Lean forward and lift the lever to return the seatback to its
normal position. Using body pressure, lean forward and
rearward on the seat to be sure the seatback has latched.
The bench seat does not stow in the floor, but is removable
for added cargo space.
Removing The Bench Seat
1. Adjust the driver and passenger seats forward to allow
room for the bench seat removal.
2. Raise the armrest completely, then lift the recline lever
located on the outboard side of the seat to fold the
seatback flat against the seat cushion.
Recline Lever Location
Folded Position
3
GETTING TO KNOW YOUR VEHICLE 77
To Next Page
Loading...
