CIAT FLOWAY ACCESS User Manual

4.4.6 - Access to the di󰀨erent controllers on a network from a shared HMI terminal
If a terminal is shared so that it can be used with several controllers, simultaneously pressing the Esc +  keys switches between
controllers. The pLAN address for the controller is displayed on the "Machine status" screen, providing information on which control
the HMI is connected to.
- For example, the screen below is the main screen for the board with the address 1:
4 - MANAGING A NETWORK OF CONTROLLERS AND HMI TERMINALS
FLOWAY ACCESS EN-32

CIAT FLOWAY ACCESS Specifications

General

Brand	CIAT
Model	FLOWAY ACCESS
Category	Air Handlers
Language	English