Need help?Do you have a question about the CIGWELD Transmig 130 Twin and is the answer not in the manual?
General| Input Voltage | 240V |
|---|---|
| Wire Diameter Range | 0.6 - 0.9 mm |
| Type | MIG |
| Welding Processes | MIG |
| Output Current Range | 30-130A |
| Wire Feed Speed | 2-12m/min |
Highlights fan cooling, voltage, amperage, overload protection, and material welding capabilities.
Describes machine ease of use and lists compatible wire types and weldable materials.
Step-by-step guide to prepare the machine for welding mild steel without gas.
Instructions for welding mild steel, stainless steel, and aluminium with gas.
Detailed steps for safely and correctly replacing the wire coil.
Guidelines for connecting and using both non-refillable and refillable gas cylinders.
Provides essential maintenance tips and useful advice for optimal machine operation.
Diagnoses and resolves issues related to jerky, non-moving, or stopped wire feed.
Addresses machine stopping due to thermal overload or motor issues.
Detailed technical parameters of the welding machine, including voltage, amperage, and duty cycle.
Information on compatible welding wires and optional accessories for the machine.
To Next Page