Need help?Do you have a question about the CIGWELD weldskill 135 and is the answer not in the manual?
Details potential hazards associated with electric shock during arc welding operations.
Lists key safety standards and publications relevant to welding and cutting.
Provides an overview of the WeldSkill 100, 135, and 150 MIG welding machines.
Technical specifications for each WeldSkill MIG model.
Requirements for mains supply voltage and electrical connections.
Procedures for connecting and using shielding gas cylinders and regulators.
Steps for feeding the welding wire through the wire feed mechanism.
Identifies and explains the controls and indicators on the WeldSkill 100 Mig front panel.
Identifies and explains the controls and indicators on the WeldSkill 135 Mig front panel.
Identifies and explains the controls and indicators on the WeldSkill 150 Mig front panel.
Covers fundamental MIG welding techniques, torch positioning, and variables.
Guidelines for regular checks and maintenance of the welding equipment.
Initial steps for diagnosing and resolving common welding equipment problems.
Troubleshooting guide for common welding issues like porosity and inconsistent feed.
Specific troubleshooting steps for power source related faults and issues.
General| Type | MIG Welder |
|---|---|
| Input Voltage | 240V |
| Output Current Range | 30-135A |
| Duty Cycle | 20% @ 135A |
| Wire Diameter | 0.6-0.9mm |
| Protection Class | IP21S |
To Next Page