EasyManua.ls Logo

Cirrus SR22 - Balked Landing;Go-Around

Cirrus SR22
524 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Cirrus Design Section 4
SR22 Normal Procedures
P/N 13772-004 4-21P/N 13772-004 4-21
Balked Landing/Go-Around
1. Autopilot.....................................................................DISENGAGE
2. Power Lever ........................................................ FULL FORWARD
3. Flaps ........................................................................................50%
4. Airspeed........................................................................80-85 KIAS
After clear of obstacles:
5. Flaps ......................................................................................... UP
Amplification
In a balked landing (go around) climb, disengage autopilot, apply full
power, then reduce the flap setting to 50%. If obstacles must be
cleared during the go around, climb at 80-85 KIAS with 50% flaps.
After clearing any obstacles, retract the flaps and accelerate to the
normal flaps up climb speed.
After Landing
1. Power Lever ................................................................... 1000 RPM
2. Fuel Pump ...............................................................................OFF
3. Flaps .......................................................................................... UP
4. Transponder ...........................................................................STBY
5. Lights ..................................................................... AS REQUIRED
6. Pitot Heat .................................................................................OFF
• Note •
As the airplane slows the rudder becomes less effective and
taxiing is accomplished using differential braking.
Original Issue

Table of Contents

Other manuals for Cirrus SR22

Related product manuals