Cisco 1109-4PLTE2P User Manual

Remove the Cover
To remove the cover, do these
steps:
Remove the 14 screws from either side of the cover.1 and 2
Step 1 Read the Safety Warnings and disconnect the power supply before you perform any module replacement.
Step 2 Confirm the router is turned off and disconnected from the power supply.
Hardware Installation Guide for the Cisco 1000 Series Integrated Services Router
45
Install and Upgrade Internal Modules and FRUs
Remove the Cover

Cisco 1109-4PLTE2P Specifications

General

Brand	Cisco
Model	1109-4PLTE2P
Category	Network Router
Language	English