Table 1: FMC 1600, 2600, and 4600 Features
460026001600Feature
• Common Criteria Certification for the Network Device Collaborative
Protection Profile (NDcPPv2.2E), Firewall Collaborative Protection Profile
Module (MOD_FW_v1.4e), Virtual Private Network Gateway Protection
Profile Module (MOD_VPNGW_v1.1), and IPS Extended Package (IPSEP
v2.11) on FTD 6.4.x and FX-OS 2.6.x
• Federal Information Processing Standards (FIPS) 140-2 on FTD 6.4.x
• Department of Defense Information Network Approved Product List (DoDIN
APL)
• US Government Compliance for IPv6 (USGv6) and Ready Logo certified
on FMC 7.0.x
See the "Security Certifications Compliance" topic in the "Appliance Platform
Settings" chapter in the Firepower Management Center Configuration Guide,
Version 6.7 for the instructions on how to enable security certifications
compliance.
Security standards
certifications
1 RUForm factor
Standard 19-in. (48.3 cm) 4-post EIA rackRack mount
Front to rear
Cold aisle to hot aisle
Airflow
Displays the serial number and the MAC address for the two built-in management
ports
Pullout asset card
Two threaded holes for a dual-hole grounding lug
Use is optional; the supported AC power supplies have internal grounding, so
no additional chassis grounding is required.
Grounding hole
On the front panelUnit identification button
On the rear panelPower button
Before January 2021: Two
Intel Xeon 4116
processors
After January 2021: Two
Intel Xeon 4214
Before January 2021:
Two Intel Xeon 4110
processors
After January 2021: Two
Intel Xeon 4215
Before January 2021: One
Intel Xeon 4110 processor
After January 2021: One
Intel Xeon 4215
Processor
128-GB RAM64-GB RAM32-GB RAMMemory
Cisco Firepower Management Center 1600, 2600, and 4600 Hardware Installation Guide
2
Overview
Features
To Next Page
Loading...
Need help?
General
