10/100BASE-T Ethernet Switch High-Speed WAN Interface Cards
Installing Inline Power Daughter Cards on Cisco 10/100BASE-T Ethernet Switch HWICs
3
OL-12850-01
Figure 110 HWIC-D-9ESW Faceplate
Installing Inline Power Daughter Cards on Cisco 10/100BASE-T
Ethernet Switch HWICs
This section describes the installation of inline power daughter cards on HWIC-4ESW and
HWIC-D-9ESW Ethernet switch HWICs. Table 31 shows the inline power card mapping for the two
HWICs.
Note The inline power daughter cards are available separately as spares.
Note The inline power daughter cards are NOT interchangeable between the 4-port and the (8+1)-port HWICs.
1 Product name 3 Port number
2 Inline power LED 4 Link LED
Table 30 Cisco 10/100BASE-T Ethernet Switch HWIC LEDs
LED Color Definition States
LNK Green Link
Status
ON = Link pulses detected
OFF = No link pulses detected
ILP Green/amber Inline
Power
Status
GREEN = Providing power to the device
AMBER BLINKING = Power delivery fault or denial
AMBER = Power administratively disabled
OFF = No external device detected, or inline power option not
installed.
95787
HWICD
9ESW
1
3
2 4
PWR 0x LNKPWR 1x LNKPWR 2x LNKPWR 3x LNKPWR 4x LNKPWR 5x LNKPWR 6x LNKPWR 7x LNK8x LNK
Table 31 HWIC and Inline Power Card Mapping
HWIC Part Number Inline Power Part Number
HWIC-4ESW ILPM-4
HWIC-D-9ESW ILPM-8
To Next Page
Loading...
