EasyManuals Logo

Cisco 1941 User Manual

Cisco 1941
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #171 background imageLoading...
Page #171 background image
163
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Identity Features on Layer 3 Interface
Control-Direction (Wake-on-LAN)
DETAILED STEPS
Control-Direction (Wake-on-LAN)
When the router uses IEEE 802.1X authentication with Wake-on-LAN (WoL), the router forwards traffic
to the unauthorized IEEE 802.1X ports, including the magic packets. While the port is unauthorized, the
switch continues to block ingress traffic other than EAPol packets. The host can receive packets, but
cannot send packets to other devices in the network.
Configuring Control-Direction (Wake-on-LAN)
Perform these steps to configure Control-Direction (Wake-on-LAN).
SUMMARY STEPS
1. enable
2. configure terminal
3. interface gigabitethernet slot / port
4. authentication control-direction {in|both}
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode. Enter your
password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
interface gigabitethernet slot/port
Example:
Router(config)# interface gigabitethernet
0/0
Enters interface configuration mode.
Step 4
authentication open
Example:
Router(config-if)# authentication open
Enables open access on a port.
Step 5
end
Example:
Router(config-if)# end
Router#
Returns to privileged EXEC mode.

Table of Contents

Other manuals for Cisco 1941

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 1941 and is the answer not in the manual?

Cisco 1941 Specifications

General IconGeneral
Product TypeRouter
Product Series1900
Model1941
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Flash Memory256 MB
Power SupplyInternal power supply
PowerAC 120/230 V (50/60 Hz)
Operating SystemCisco IOS
Product NameCisco 1941
Form FactorRack-mountable
Network/Transport ProtocolIPSec, L2TP, PPPoE, PPPoA
Remote Management ProtocolSNMP, Telnet, SSH, HTTP, HTTPS
FeaturesFirewall protection, VPN support, VLAN support
Interfaces2 x 10/100/1000Base-T Ethernet WAN, 2 x USB 2.0
Expansion Slots2 x EHWIC 1 x ISM slot
Wireless LANNo
RAM512 MB (installed) / 768 MB (max)

Related product manuals