EasyManuals Logo

Cisco 1941 User Manual

Cisco 1941
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #298 background imageLoading...
Page #298 background image
290
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Radio Settings
Configuring the Maximum Data Retries
Configuring the Maximum Data Retries
The maximum data retries setting determines the number of attempts that the wireless device makes to
send a packet before it drops the packet. The default setting is 32.
To configure the maximum data retries, follow these steps, beginning in privileged EXEC mode.
SUMMARY STEPS
1. configure terminal
2. interface dot11radio {0| 1}
3. packet retries value
4. end
5. copy running-config startup-config
DETAILED STEPS
Use the no form of the packet retries command to reset the setting to the default.
Configuring the Fragmentation Threshold
The fragmentation threshold determines the size at which packets are fragmented (sent as several pieces
instead of as one block). Use a low setting in areas where communication is poor or where there is a great
deal of radio interference. The default setting is 2346 bytes.
To configure the fragmentation threshold, follow these steps, beginning in privileged EXEC mode.
SUMMARY STEPS
1. configure terminal
2. interface dot11radio {0| 1}
3. fragment-threshold value
4. end
5. copy running-config startup-config
Command Purpose
Step 1
configure terminal Enters global configuration mode.
Step 2
interface dot11radio {0| 1} Enters interface configuration mode for the radio interface. The
802.11g/n 2.4-GHz radio is radio 0.
The 802.11n 5-GHz radio is radio 1.
Step 3
packet retries value Sets the maximum data retries. Enter a setting from 1 to 128.
Step 4
end Returns to privileged EXEC mode.
Step 5
copy running-config startup-config (Optional) Saves your entries in the configuration file.

Table of Contents

Other manuals for Cisco 1941

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 1941 and is the answer not in the manual?

Cisco 1941 Specifications

General IconGeneral
Product TypeRouter
Product Series1900
Model1941
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Flash Memory256 MB
Power SupplyInternal power supply
PowerAC 120/230 V (50/60 Hz)
Operating SystemCisco IOS
Product NameCisco 1941
Form FactorRack-mountable
Network/Transport ProtocolIPSec, L2TP, PPPoE, PPPoA
Remote Management ProtocolSNMP, Telnet, SSH, HTTP, HTTPS
FeaturesFirewall protection, VPN support, VLAN support
Interfaces2 x 10/100/1000Base-T Ethernet WAN, 2 x USB 2.0
Expansion Slots2 x EHWIC 1 x ISM slot
Wireless LANNo
RAM512 MB (installed) / 768 MB (max)

Related product manuals