Cisco 1941 User Manual

191
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Next-Generation High-Density PVDM3 Modules
Information About Configuring the PVDM3 Module on Cisco Voice Gateway Routers
7. shutdown
8. exit
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enable privileged EXEC mode
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enter global configuration mode.
Step 3
controller e1 slot/port
Example:
Router(config)# controller e1 0/0/0
Enter config-controller mode.
Step 4
shutdown
Example:
Router(config-controller)# shutdown
Administratively shuts down the controller port.
Step 5
exit
Example:
Router(config-controller)# exit
Exit config-controller mode.
Step 6
voice-port slot number/port
Example:
Router(config)# voice-port 0/0/0:1
Enter config-voiceport mode.
Step 7
shutdown
Example:
Router(config-voiceport)# shutdown
Administratively shuts down the voice port.
Step 8
exit
Example:
Router(config-voiceport)# exit
Exit config-voiceport mode.
Use the exit command till you are in privileged
EXEC mode.

Cisco 1941 Specifications

General

Product Type	Router
Product Series	1900
Model	1941
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Flash Memory	256 MB
Power Supply	Internal power supply
Power	AC 120/230 V (50/60 Hz)
Operating System	Cisco IOS
Product Name	Cisco 1941
Form Factor	Rack-mountable
Network/Transport Protocol	IPSec, L2TP, PPPoE, PPPoA
Remote Management Protocol	SNMP, Telnet, SSH, HTTP, HTTPS
Features	Firewall protection, VPN support, VLAN support
Interfaces	2 x 10/100/1000Base-T Ethernet WAN, 2 x USB 2.0
Expansion Slots	2 x EHWIC 1 x ISM slot
Wireless LAN	No
RAM	512 MB (installed) / 768 MB (max)