Cisco 1941 User Manual

193
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Next-Generation High-Density PVDM3 Modules
Information About Configuring the PVDM3 Module on Cisco Voice Gateway Routers
DETAILED STEPS
Command or Action Purpose
Step 1
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 2
controller e1 slot/port
Example:
Router(config)# controller e1 0/0/0
Enters config-controller mode.
Step 3
no shutdown
Example:
Router(config-controller)# no shutdown
Restarts the controller port.
Step 4
exit
Example:
Router(config-controller)# exit
Exits config-controller mode.
Step 5
voice-port slot number/port
Example:
Router(config)# voice-port 0/0/0:1
Enters config-voiceport mode.
Step 6
no shutdown
Example:
Router(config-voiceport)# no shutdown
Restarts the voice port.
Step 7
exit
Example:
Router(config-voiceport)# exit
Exits config-voiceport mode.

Cisco 1941 Specifications

General

Product Type	Router
Product Series	1900
Model	1941
Connectivity Technology	Wired
Data Link Protocol	Ethernet, Fast Ethernet, Gigabit Ethernet
Flash Memory	256 MB
Power Supply	Internal power supply
Power	AC 120/230 V (50/60 Hz)
Operating System	Cisco IOS
Product Name	Cisco 1941
Form Factor	Rack-mountable
Network/Transport Protocol	IPSec, L2TP, PPPoE, PPPoA
Remote Management Protocol	SNMP, Telnet, SSH, HTTP, HTTPS
Features	Firewall protection, VPN support, VLAN support
Interfaces	2 x 10/100/1000Base-T Ethernet WAN, 2 x USB 2.0
Expansion Slots	2 x EHWIC 1 x ISM slot
Wireless LAN	No
RAM	512 MB (installed) / 768 MB (max)