EasyManuals Logo

Cisco 1941 User Manual

Cisco 1941
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #356 background imageLoading...
Page #356 background image
A-10
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Appendix A Cisco IOS CLI for Initial Configuration
Using the Cisco IOS CLI to Perform Initial Configuration
6. end
7. show ip route
DETAILED STEPS
Command or Action Purpose
Step 1
enable
Example:
Router> enable
Enables privileged EXEC mode.
• Enter your password if prompted.
Step 2
configure terminal
Example:
Router# configure terminal
Enters global configuration mode.
Step 3
ip routing
Example:
Router(config)# ip routing
Enables IP routing.
Step 4
ip route dest-prefix mask next-hop-ip-address
[admin-distance] [permanent]
Example:
Router(config)# ip route 192.168.24.0
255.255.255.0 172.28.99.2
Establishes a static route.
Step 5
ip default-network network-number
or
ip route dest-prefix mask next-hop-ip-address
Example:
Router(config)# ip default-network 192.168.24.0
Example:
Router(config)# ip route 0.0.0.0 0.0.0.0
172.28.99.1
Selects a network as a candidate route for computing the
gateway of last resort.
Creates a static route to network 0.0.0.0 0.0.0.0 for
computing the gateway of last resort.
Step 6
end
Example:
Router(config)# end
Returns to privileged EXEC mode.
Step 7
show ip route
Example:
Router# show ip route
Displays the current routing table information.
• Verify that the gateway of last resort is set.

Table of Contents

Other manuals for Cisco 1941

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 1941 and is the answer not in the manual?

Cisco 1941 Specifications

General IconGeneral
Product TypeRouter
Product Series1900
Model1941
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Flash Memory256 MB
Power SupplyInternal power supply
PowerAC 120/230 V (50/60 Hz)
Operating SystemCisco IOS
Product NameCisco 1941
Form FactorRack-mountable
Network/Transport ProtocolIPSec, L2TP, PPPoE, PPPoA
Remote Management ProtocolSNMP, Telnet, SSH, HTTP, HTTPS
FeaturesFirewall protection, VPN support, VLAN support
Interfaces2 x 10/100/1000Base-T Ethernet WAN, 2 x USB 2.0
Expansion Slots2 x EHWIC 1 x ISM slot
Wireless LANNo
RAM512 MB (installed) / 768 MB (max)

Related product manuals