EasyManuals Logo

Cisco 1941 User Manual

Cisco 1941
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #98 background imageLoading...
Page #98 background image
90
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Ethernet Virtual Connection Bridge Domain
Support for Switch Virtual Interfaces (SVI) on ISR G2 Metro Ethernet BD
What to Do Next
To add proactive threshold conditions and reactive triggering for generating traps, see the “Configuring
Proactive Threshold Monitoring" module of the IP SLAs Configuration Guide.
When you are finished configuring proactive threshold monitoring for this operation, see the
"Scheduling IP SLAs Operations" section to schedule the operation.
Support for Switch Virtual Interfaces (SVI) on ISR G2 Metro
Ethernet BD
You can connect a SVI with a Metro Ethernet BD to re-direct the traffic from a switch port onto the BD
and vice versa, as shown in Figure 1.
Step 11
history interval intervals-stored
Example:
Router(config-sla-y1731-delay)#
history interval 2
(Optional) Sets the number of statistics distributions kept
during the lifetime of an IP SLAs Ethernet operation.
Step 12
max-delay milliseconds
Example:
Router(config-sla-y1731-delay)#
max-delay 5000
(Optional) Sets the amount of time an MEP waits for a
frame.
Step 13
owner owner-id
Example:
Router(config-sla-y1731-delay)# owner
admin
(Optional) Configures the owner of an IP SLAs operation.
Step 14
end
Example:
Router(config-sla-y1731-delay)# end
Exits to privileged EXEC mode.
Command Purpose

Table of Contents

Other manuals for Cisco 1941

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 1941 and is the answer not in the manual?

Cisco 1941 Specifications

General IconGeneral
Product TypeRouter
Product Series1900
Model1941
Connectivity TechnologyWired
Data Link ProtocolEthernet, Fast Ethernet, Gigabit Ethernet
Flash Memory256 MB
Power SupplyInternal power supply
PowerAC 120/230 V (50/60 Hz)
Operating SystemCisco IOS
Product NameCisco 1941
Form FactorRack-mountable
Network/Transport ProtocolIPSec, L2TP, PPPoE, PPPoA
Remote Management ProtocolSNMP, Telnet, SSH, HTTP, HTTPS
FeaturesFirewall protection, VPN support, VLAN support
Interfaces2 x 10/100/1000Base-T Ethernet WAN, 2 x USB 2.0
Expansion Slots2 x EHWIC 1 x ISM slot
Wireless LANNo
RAM512 MB (installed) / 768 MB (max)

Related product manuals