EasyManuals Logo
Home>Cisco>Network Router>2911

Cisco 2911 Configuration Guide

Cisco 2911
408 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #211 background imageLoading...
Page #211 background image
203
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Next-Generation High-Density PVDM3 Modules
Configuration Examples for Configuring the PVDM3 Module on Cisco Voice Gateway Routers
voice service voip
allow-connections h323 to h323
allow-connections h323 to sip
allow-connections sip to h323
allow-connections sip to sip
fax protocol cisco
!
!
!
archive
log config
hidekeys
!
!
controller T1 0/0/0
cablelength long 0db
ds0-group 1 timeslots 1-24 type e&m-immediate-start
!
controller T1 0/0/1
cablelength long 0db
pri-group timeslots 1-24
!
controller T1 2/0
!
controller T1 2/1
!
controller T1 2/0/0
cablelength long 0db
!
controller T1 2/0/1
cablelength long 0db
!
!
!
!
interface GigabitEthernet0/0
mtu 9600
ip address 10.1.32.147 255.255.0.0
duplex auto
speed auto
no cdp enable
!
interface GigabitEthernet0/1
mtu 9600
ip address 10.1.1.1 255.255.255.0
duplex auto
speed auto
media-type rj45
no cdp enable
!
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
no cdp enable
!
interface Serial0/0/1:23
no ip address
encapsulation hdlc
isdn switch-type primary-ni
isdn incoming-voice voice
no cdp enable
!

Table of Contents

Other manuals for Cisco 2911

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Cisco 2911 and is the answer not in the manual?

Cisco 2911 Specifications

General IconGeneral
Ethernet LANYes
Cabling technology10/100/1000Base-T(X)
Networking standardsIEEE 802.1Q, IEEE 802.1ag, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3u
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet interface typeGigabit Ethernet
DHCP client-
Routing protocolsBGP, EIGRP, OSPF
Supported protocolsIPv4, IPv6, IS-IS, IGMPv3, PIM SM, SSM, DVMRP, IPSec, GRE, BVD, MPLS, L2TPv3, PPP, MLPPP, MLFR, HDLC, RS-232, RS-449, X.21, V.35, EIA-530, PPPoE, ATM
USB version2.0
RS-232 ports1
Expansion slots4 x EHWIC 2 x DSP 1 x ISM
USB ports quantity2
Ethernet LAN (RJ-45) ports3
Firewall securityCisco IOS
Input current2.2 A
AC input voltage100 - 240 V
Power source typeAC
AC input frequency47 - 63 Hz
Power consumption (typical)50 W
Product colorBlack
Rack capacity2U
Operating altitude0 - 4000 m
Non-operating altitude0 - 4570 m
Storage temperature (T-T)-40 - 80 °C
Operating temperature (T-T)0 - 40 °C
Storage relative humidity (H-H)5 - 95 %
Operating relative humidity (H-H)5 - 85 %
SafetyUL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950-1, IEC 60950-1
Electromagnetic compatibility47 CFR, ICES-003, EN55022, CISPR22, AS/NZS 3548, VCCI V-3, EN 300-386, EN 61000, EN 55024, CISPR 24EN50082-1
Weight and Dimensions IconWeight and Dimensions
Depth304.8 mm
Width438.2 mm
Height88.9 mm
Weight8200 g

Related product manuals