Cisco 2911 Configuration Guide

41
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Ethernet CFM and Y.1731 Performance Monitoring on Layer 3 Interfaces
CFM Support on Routed Port and Port MEP
Services:
Type Id Dir CC CC-int Static-rmep Crosscheck MaxMEP Source MA-Name
Port none Dwn Y 100ms Disabled Disabled 100 Static carrier
Router#
Use the show ethernet cfm maintenance-points local command to view the MEPs that are configured
locally on a router. The following is a sample output of the show ethernet cfm maintenance-points
local command:
Router#show ethernet cfm maintenance-points local
Local MEPs:
--------------------------------------------------------------------------------
MPID Domain Name Lvl MacAddress Type CC
Ofld Domain Id Dir Port Id
MA Name SrvcInst Source
EVC name
--------------------------------------------------------------------------------
44 carrier 2 5657.a844.04fa Port Y
No carrier Down Gi0/2 none
carrier N/A Static
N/A
Total Local MEPs: 1
Local MIPs: None
Use the show ethernet cfm maintenance-points remote command to display information about remote
maintenance point domains or levels. In the following example, carrier, Provider, and customer are the
maintenance point domains that are configured.
On router 1:
Router1#show ethernet cfm maintenance-points remote
--------------------------------------------------------------------------------
MPID Domain Name MacAddress IfSt PtSt
Lvl Domain ID Ingress
RDI MA Name Type Id SrvcInst
EVC Name Age
Local MEP Info
--------------------------------------------------------------------------------
43 carrier 5657.a86c.fa92 Up N/A
2 carrier Gi0/2
- carrier Port none N/A
N/A 0s
MPID: 44 Domain: carrier MA: carrier
33 Provider 5657.a86c.fa92 Up Up
5 Provider Gi0/2.100
- Provider Vlan 100 N/A
N/A 0s
MPID: 34 Domain: Provider MA: Provider
3101 customer 5657.a86c.fa92 Up Up
7 customer Gi0/2.1101
- customer1101 S,C 100,1101 N/A
N/A 0s
MPID: 4101 Domain: customer MA: customer1101
3102 customer 5657.a86c.fa92 Up Up
7 customer Gi0/2.1102
- customer1102 S,C 100,1102 N/A
N/A 0s
MPID: 4102 Domain: customer MA: customer1102

Cisco 2911 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1Q, IEEE 802.1ag, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DHCP client	-
Routing protocols	BGP, EIGRP, OSPF
Supported protocols	IPv4, IPv6, IS-IS, IGMPv3, PIM SM, SSM, DVMRP, IPSec, GRE, BVD, MPLS, L2TPv3, PPP, MLPPP, MLFR, HDLC, RS-232, RS-449, X.21, V.35, EIA-530, PPPoE, ATM
USB version	2.0
RS-232 ports	1
Expansion slots	4 x EHWIC 2 x DSP 1 x ISM
USB ports quantity	2
Ethernet LAN (RJ-45) ports	3
Firewall security	Cisco IOS
Input current	2.2 A
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	47 - 63 Hz
Power consumption (typical)	50 W
Product color	Black
Rack capacity	2U
Operating altitude	0 - 4000 m
Non-operating altitude	0 - 4570 m
Storage temperature (T-T)	-40 - 80 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 85 %
Safety	UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950-1, IEC 60950-1
Electromagnetic compatibility	47 CFR, ICES-003, EN55022, CISPR22, AS/NZS 3548, VCCI V-3, EN 300-386, EN 61000, EN 55024, CISPR 24EN50082-1

Weight and Dimensions

Depth	304.8 mm
Width	438.2 mm
Height	88.9 mm
Weight	8200 g