Cisco 2911 Configuration Guide

51
Cisco 3900 Series, Cisco 2900 Series, and Cisco 1900 Series Integrated Services Routers Generation 2 Software Configuration Guide
Chapter Configuring Ethernet CFM and Y.1731 Performance Monitoring on Layer 3 Interfaces
CFM Support on Routed Port and Port MEP
Use the show ethernet cfm maintenance-points local command to view the local MEPs. The following
is a sample output of the show ethernet cfm maintenance-points local command:
Router#show ethernet cfm maintenance-points local
----------------------------------------------------------------------------------
MPID Domain Name MacAddress IfSt PtSt
Lvl Domain ID Ingress
RDI MA Name Type Id SrvcInst
EVC Name Age
Local MEP Info
----------------------------------------------------------------------------------
100 customer 8843.e154.6f01 Up Up
7 customer Gi0/2.1101
- customer1101 S, C 100, 30 N/A
N/A 58s
MPID: 100 Domain: customer MA: customer1101
Router#
Use the show ethernet cfm maintenance-points remote command to display the remote maintenance
point domains. In the following example, customer, carrier, and enterprise are the maintenance point
domains that are configured:
On router 1:
Router1#show ethernet cfm maintenance-points remote
----------------------------------------------------------------------------------
MPID Domain Name MacAddress IfSt PtSt
Lvl Domain ID Ingress
RDI MA Name Type Id SrvcInst
EVC Name Age
Local MEP Info
----------------------------------------------------------------------------------
110 customer 8843.e154.6f01 Up Up
7 customer Gi0/2.1101
- customer1101 S, C 100, 30 N/A
N/A 58s
MPID: 100 Domain: customer MA: customer1101
43 carrier 8843.e154.6f01 Up Up
2 carrier Gi0/2.2
- carrier S, C 50, 20 N/A
N/A 58s
MPID: 44 Domain: carrier MA: carrier
410 enterprise 8843.e154.6f01 Up Up
6 enterprise Gi0/1.1
- custservice S, C 200, 70 N/A
N/A 58s
MPID: 400 Domain: enterprise MA: custservice
Router1#
On router 2:
Router2#show ethernet cfm maintenance-points remote
----------------------------------------------------------------------------------
MPID Domain Name MacAddress IfSt PtSt
Lvl Domain ID Ingress
RDI MA Name Type Id SrvcInst
EVC Name Age
Local MEP Info
----------------------------------------------------------------------------------

Cisco 2911 Specifications

General

Ethernet LAN	Yes
Cabling technology	10/100/1000Base-T(X)
Networking standards	IEEE 802.1Q, IEEE 802.1ag, IEEE 802.3, IEEE 802.3ab, IEEE 802.3af, IEEE 802.3ah, IEEE 802.3u
Ethernet LAN data rates	10, 100, 1000 Mbit/s
Ethernet interface type	Gigabit Ethernet
DHCP client	-
Routing protocols	BGP, EIGRP, OSPF
Supported protocols	IPv4, IPv6, IS-IS, IGMPv3, PIM SM, SSM, DVMRP, IPSec, GRE, BVD, MPLS, L2TPv3, PPP, MLPPP, MLFR, HDLC, RS-232, RS-449, X.21, V.35, EIA-530, PPPoE, ATM
USB version	2.0
RS-232 ports	1
Expansion slots	4 x EHWIC 2 x DSP 1 x ISM
USB ports quantity	2
Ethernet LAN (RJ-45) ports	3
Firewall security	Cisco IOS
Input current	2.2 A
AC input voltage	100 - 240 V
Power source type	AC
AC input frequency	47 - 63 Hz
Power consumption (typical)	50 W
Product color	Black
Rack capacity	2U
Operating altitude	0 - 4000 m
Non-operating altitude	0 - 4570 m
Storage temperature (T-T)	-40 - 80 °C
Operating temperature (T-T)	0 - 40 °C
Storage relative humidity (H-H)	5 - 95 %
Operating relative humidity (H-H)	5 - 85 %
Safety	UL 60950-1, CAN/CSA C22.2 No. 60950-1, EN 60950-1, AS/NZS 60950-1, IEC 60950-1
Electromagnetic compatibility	47 CFR, ICES-003, EN55022, CISPR22, AS/NZS 3548, VCCI V-3, EN 300-386, EN 61000, EN 55024, CISPR 24EN50082-1

Weight and Dimensions

Depth	304.8 mm
Width	438.2 mm
Height	88.9 mm
Weight	8200 g