Cisco 3800 Series

To Next Page

To Previous Page

Installing and Removing Slot Dividers

Installing Network Modules in Cisco 3800 Series Routers

OL-5973-01

Removing Slot Dividers

Note The network module slots on both sides of a slot divider must be empty of network modules and slot

adapters before you remove the slot divider.

To remove slot dividers from network module slots, follow these steps:

Step 1 Using a number 1 Phillips screwdriver, loosen the slot divider attachment screw.

Step 2 Pull the slot divider straight out of the network module slot.

Tip Save the slot divider for future use.

Cisco 3800 Series - Page 88