A-73
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
show atm cell-packing
show atm cell-packing
To display cell packing information for the Layer 2 attachment circuits (ACs) configured on your system,
use the show atm cell-packing command in the EXEC mode.
show atm cell-packing
Syntax Description This command has no arguments or keywords.
Command Modes EXEC
Command History
Examples The following sample output is from the show atm cell-packing command:
Router# show atm cell-packing
avg # avg #
Circuit local cells/pkt negotiated cells/pkt MCPT
Type MNCP rcvd MNCP sent (us)
ATM0/2/0/1.200 vc 1/200 1 0 1 0 50
ATM0/2/0/1.300 vc 1/300 1 0 1 0 50
Related Commands
Release Modification
Release 3.4.1 This command was introduced on the Cisco XR 12000 Series Router.
12.4(12)MR2 This command was integrated into Cisco IOS Release 12.4(12)MR2.
Command Description
cell-packing Packs multiple ATM cells into each MPLS or L2TPv3 packet.
atm cell-packing Packs multiple ATM cells into each MPLS or L2TPv3 packet.
To Next Page
Loading...
