Cisco 3825 - Description Invokes Y-Cable Mode; Invokes Redundancy Mode; Sets HSRP Attributes; Standalone Configuration

A-121
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
standby use-interface
Examples The following example specifies loopback101 as the health interface and loopback102 as the revertive
interface:
Router# standby use-interface loopback101 health
Router# standby use-interface loopback102 revertive
Router# standby use-interface multilink1 backhaul
Related Commands Command Description
mode y-cable Invokes y-cable mode.
redundancy Invokes redundancy mode.
standalone Specifies whether the Cisco 3825 router is used in a redundant or
stand-alone configuration.
standby Sets HSRP attributes.