Cisco 3825 - ATM over L2 Tpv3 Configuration

B-48
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix B Configuration Examples
Overview
ATM over L2TPv3 Configuration
The illustration below configures an ATM port mode PW on interface ATM 0/0/0, ATM AAL5 SDU
mode PW on ATM0/0/1 PVC 0/100, ATM N:1 VCC cell mode PW on ATM0/0/1 PVC 0/101, and
multiple PVCs N:1 VCC cell mode PW on ATM 0/0/1.1. It also configures Cell-Packing for port mode
PWs, VCC cell-relay mode PWs and PVC mapping for ATM0/0/1.1 N:1 VCC cell relay PWs (see
Figure B-7).
Figure B-7 ATM over L2TPv3 Configuration
MWR_A
!
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname mwr_A
!
boot-start-marker
boot-end-marker
!
card type e1 0 0
card type e1 0 1
card type e1 0 2
card type e1 1 0
logging buffered 4096
enable password lab
!
no aaa new-model
memory-size iomem 25
!
redundancy
mode y-cable
standalone
!
network-clock-participate slot 1
network-clock-participate wic 0
network-clock-participate wic 1
network-clock-participate wic 2
network-clock-participate aim 1
network-clock-select 1 E1 1/0/0
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
ip cef
!
ATM over L2TPv3 Configuration
270640
Node-B
MWR_A
ATM0/0/0
ATM0/0/1
2.2.2.2/24 2.2.2.3/24
ATM0/0/0
ATM0/0/1
MWR_B
88.88.88.88 99.99.99.99
RNC
GE 0/0/1 GE 0/0/1