Cisco 3825 - Page 241

A-109
Cisco 3825 Mobile Wireless Edge Router Software Configuration Guide
OL-15667-03
Appendix A Cisco 3825 Mobile Wireless Edge Router RAN-O Command Reference
show umts-iub peering
UMTS-Iub(ATM0/IMA0): Alarm State:
UMTS-Iub(ATM0/0/0) ID(1): RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/0/1) ID(2): RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/IMA0.1): Peering Information
UMTS-Iub(ATM0/IMA0.1): Local (192.168.10.2:6666) States:
UMTS-Iub(ATM0/IMA0.1): Connect State: OPEN
UMTS-Iub(ATM0/IMA0.1): Redundancy State: ACTIVE
UMTS-Iub(ATM0/IMA0.1): Version: 3
UMTS-Iub(ATM0/IMA0.1): Remote (192.168.10.1:6666) States:
UMTS-Iub(ATM0/IMA0.1): Version: 3
Example 5 with Alarms over Primary Backhaul
Router# show umts peering
UMTS-Iub(ATM0/IMA0): Peering Information
UMTS-Iub(ATM0/IMA0): Local (20.20.20.21:6666) States:
UMTS-Iub(ATM0/IMA0): Connect State: OPEN
UMTS-Iub(ATM0/IMA0): Redundancy State: ACTIVE
UMTS-Iub(ATM0/IMA0): Version: 3
UMTS-Iub(ATM0/IMA0): Alarm State:
UMTS-Iub(ATM0/0/0) ID(1): RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/0/1) ID(2): RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/IMA0): Remote (20.20.20.20:6666) States:
UMTS-Iub(ATM0/IMA0): Version: 3
UMTS-Iub(ATM0/IMA0): Alarm State:
UMTS-Iub(ATM0/0/0) ID(1): RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/0/1) ID(2): RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/IMA0.1): Peering Information
UMTS-Iub(ATM0/IMA0.1): Local (192.168.10.2:6666) States:
UMTS-Iub(ATM0/IMA0.1): Connect State: OPEN
UMTS-Iub(ATM0/IMA0.1): Redundancy State: ACTIVE
UMTS-Iub(ATM0/IMA0.1): Version: 3
UMTS-Iub(ATM0/IMA0.1): Remote (192.168.10.1:6666) States:
UMTS-Iub(ATM0/IMA0.1): Version: 3
Example 6 with Congestion Control Status
Router# show umts-iub peering atm 0/ima0
UMTS-Iub(ATM0/IMA0): Peering Information
UMTS-Iub(ATM0/IMA0 - ATM0/IMA1): Local (20.20.20.21:6666) States:
UMTS-Iub(ATM0/IMA0 - ATM0/IMA1): Connect State: OPEN
UMTS-Iub(ATM0/IMA0 - ATM0/IMA1): Redundancy State: ACTIVE
UMTS-Iub(ATM0/IMA0 - ATM0/IMA1): Congestion Control: ON
UMTS-Iub(ATM0/IMA0 - ATM0/IMA1): Version: 4
UMTS-Iub(ATM0/IMA0 - ATM0/IMA1): Alarm State:
UMTS-Iub(ATM0/0/0 - ATM0/2): RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/0/1 - ATM0/3): RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/IMA0 - ATM0/IMA1): Remote (20.20.20.20:6666) States:
UMTS-Iub(ATM0/IMA0 - ATM0/IMA1): Version: 4
UMTS-Iub(ATM0/IMA0 - ATM0/IMA1): Alarm State:
UMTS-Iub(ATM0/0/0 - ATM0/2): RX(NO ALARM) TX(NO ALARM)
UMTS-Iub(ATM0/0/1 - ATM0/3): RX(NO ALARM) TX(NO ALARM)
Related Commands Command Description
clear umts-iub Clears the statistics displayed.