CHAPTER
1-1
Cisco ASA 5500 Series Hardware Installation Guide
OL-10089-01
1
Preparing for Installation
The information in this guide applies to the following ASA 5500 series models: ASA 5505, ASA 5510,
ASA 5520, ASA 5540, and ASA 5550. In this guide, references to “Cisco ASA 5500 series adaptive
security appliance” and “adaptive security appliance” apply to all models unless specifically noted
otherwise.
This chapter describes the steps to follow before installing new hardware or performing hardware
upgrades, and includes the following topics:
• Overview, page 1-1
• Installation Overview, page 1-2
• Safety Recommendations, page 1-2
• General Site Requirements, page 1-4
Overview
The adaptive security appliance delivers unprecedented levels of defense against threats to the network
with deeper web inspection and flow-specific analysis, improved secure connectivity via end-point
security posture validation, and voice and video over VPN support. It also provides enhanced support
for intelligent information networks through improved network integration, resiliency, and scalability.
The adaptive security appliance software combines firewall, VPN concentrator, and intrusion prevention
software functionality into one software image. Previously, these functions were available in three
separate devices, each with its own software and hardware. Combining the functionality into just one
software image provides significant improvements in the available features.
To Next Page
Loading...
Need help?
General
