CHAPTER 2
Provisioning Scripts
•
Provisioning Scripts, page 11
•
Configuration Profile Formats, page 11
•
Open Profile (XML) Compression and Encryption, page 15
•
Apply a Profile to the IP Telephony Device, page 21
•
Provisioning Parameters, page 22
•
Data Types, page 28
•
Profile Updates and Firmware Upgrades, page 31
Provisioning Scripts
The phone accepts configuration in an XML format.
The examples in this document use configuration profiles with an XML format (XML) syntax. Sample profiles
can be found in Sample Configuration Profiles, on page 71.
For detailed information about your phone, refer to the administration guide for your particular device. Each
guide describes the parameters that can be configured through the administration web server.
Configuration Profile Formats
The configuration profile defines the parameter values for the phone.
The configuration profile XM format uses standard XML authoring tools to compile the parameters and values.
Only the UTF-8 charset is supported. If you modify the profile in an editor, do not change the encoding
format; otherwise, the phone cannot recognize the file.
Note
Each phone has a different feature set and therefore, a different set of parameters.
Cisco IP Phone 6800 Series Multiplatform Phones Provisioning Guide
11
To Next Page
Loading...
Need help?
General
