CHAPTER 4
Provisioning Examples
•
Provisioning Examples Overview, page 45
•
Basic Resync, page 45
•
Secure HTTPS Resync, page 51
•
Profile Management, page 58
Provisioning Examples Overview
This chapter provides example procedures for transferring configuration profiles between the phone and the
provisioning server.
For information about creating configuration profiles, refer to Provisioning Scripts, on page 11.
Basic Resync
This section demonstrates the basic resync functionality of the phones.
TFTP Resync
The phone supports multiple network protocols for retrieving configuration profiles. The most basic profile
transfer protocol is TFTP (RFC1350). TFTP is widely used for the provisioning of network devices within
private LAN networks. Although not recommended for the deployment of remote endpoints across the Internet,
TFTP can be convenient for deployment within small organizations, for in-house preprovisioning, and for
development and testing. See In-House Device Preprovisioning, on page 37 for more information on in-house
preprovisioning. In the following procedure, a profile is modified after downloading a file from a TFTP server.
Cisco IP Phone 6800 Series Multiplatform Phones Provisioning Guide
45
To Next Page
Loading...
Need help?
General
