Phone
General
DescriptionParameter
Name of the phone.Station Name
Name to identify the phone; appears on the phone
screen. You can use spaces in this field and the name
does not have to be unique.
Station Display Name
A phone number or URL to check voice mail.
Default: None
Voice Mail Number
This field is available for Cisco IP Phone 6841
Multiplatform Phones and Cisco IP Phone 6851
Multiplatform Phones.
Enables or disables the phone to use the wideband
handset.
By default, the system configures the setting of this
field against the phone's hardware version. You can
also change the setting as needed.
Default: The default setting depends upon the phone's
hardware version.
• Hardware version 00 and 01: No
• Hardware version 02: Yes
WideBand Handset Enable
Line Key
Each line key has a set of settings.
DescriptionParameter
Specifies the n extension to be assigned to Line Key
n.
Default: n
XML configuration examples:
To set the line key 1 to extension 1:
<Extension_1_
ua="na">1</Extension_1_>
To disable the extension function for line key 2:
<Extension_2_
ua="na">Disabled</Extension_2_>
Extension
Cisco IP Phone 6800 Series Multiplatform Phones Administration Guide
264
Phone Troubleshooting
Phone
To Next Page
Loading...
Need help?
General
