Cisco 6861 Deployment Guide

Cisco IP Phone 6861 Multiplatform Phones Wireless LAN Deployment Guide
24
• Delete a profile
To delete a profile, select the profile and choose Delete from the Option menu. Press OK to confirm.
• Scan available AP
In Wi-Fi profile page, choose Scan to search for the available access points. You can choose a wireless
network from the scanned result to configure or connect to it.
Once the Scan softkey is pressed, the phone starts scanning and shows animation window as below picture
shows.
After a few seconds, the phone shows a list of scan result. You can see all the nearby APs using the outer ring
of the navigation cluster. To edit an AP, press Select to edit it in the Setup Wi-Fi page.
In the Setup Wi-Fi page, the scanned SSID, security mode, and frequency are displayed. You can enter the
credential information, e.g. Passphrase, userid, WEP ...

Cisco 6861 Specifications

General

Brand	Cisco
Model	6861
Category	IP Phone
Language	English