Configure Wireless LAN
Configure Mainstream Home-Based AP
When configuring a mainstream home-based access point, ensure that:
1. You enable internet access as below picture shows. The internet connection could be set up via wideband user
account on DSL or fiber link to external network.
2. You configure the local SSID and the secure mode for home/office usage as following picture shows.
Cisco Autonomous Access Points
When configuring Cisco Autonomous Access Points, use the following guidelines:
• Configure the Data Rates as necessary
• Configure Quality of Service (QoS)
• Set the WMM Policy to Required
• Ensure Aironet Extensions is Enabled
• Disable Public Secure Packet Forwarding (PSPF)
• Set IGMP Snooping to Enabled
To Next Page
Loading...
