Cisco 6921

5-22
Cisco Unified IP Phone 6921, 6941, 6945, and 6961 Administration Guide for Cisco Unified Communications Manager 8.6 (SCCP and SIP)
OL-24567-01
Chapter
Configuring Softkey Templates
Do Not Disturb Toggle Do Not Disturb
(DND)
No Configure Do Not Disturb as a
programmable line button.
End Call End Call (EndCall) Yes Phone displays Cancel if the call is not
answered.
Group Pickup Group Pick UP (GPickUp) Yes —
Hold Hold (Hold) No Hold is a dedicated button.
Hunt Group HLog (HLog) Yes Configure Hunt Group as a
programmable feature button.
Join Join (Join) No —
Malicious Call
Identification
Toggle Malicious Call
Identification (MCID)
No Configure Malicious Call Identification
as a programmable feature button.
Meet Me Meet Me (MeetMe) Yes —
Mobile Connect Mobility (Mobility) No Configure Mobile Connect as a
programmable feature button.
New Call New Call (NewCall) Yes Phone displays New Call.
Other Pickup Other Pickup (oPickup) Yes —
Quality Reporting Tool Quality Reporting Tool
(QRT)
No Configure Quality Reporting Tool as a
programmable feature button.
Redial Redial (Redial) Yes —
Remove Last Conference
Participant
Remove Last Conference
Participant (Remove)
Yes Phone displays Remove when a
participant is selected.
Resume Resume (Resume) Yes —
Speed Dial Abbreviated Dial
(AbbrDial)
Yes Phone displays SpeedDial.
Transfer Direct Transfer (DirTrfr) No Transfer is a dedicated button.
Configure transfer (Direct Transfer
policy) in the Product Specific
Configuration Layout section in Phone
Configuration.
Video Mode Command Video Mode Command
(VidMode)
No —
Table 5-2 Configurable Softkeys (continued)
Feature
Configurable Softkeys in the
Softkey Template
Configuration
Supported as a
softkey on
Cisco Unified
IP Phone 6921, 6941,
6945, and 6961 Notes