Cisco 7600 Series Module Guide

1-13
Cisco 7600 Series Router Module Guide
OL-9392-05
Chapter 1 Modules Overview
Software Requirements
Figure 1-13 XenPak Optical Transceiver Module
Table 1-7 lists the available XenPak transceiver modules and their specifications.
Software Requirements
For information on the minimum, recommended, and default software versions for the Cisco 7600 series
routers, supervisor engines, and modules, refer to the applicable release notes for the latest maintenance
release of your software.
113128
RX
TX
Captive installation screw
Dustplug
Transmit optical bore
Receive optical bore
Ta b l e 1-7 XenPak Optical Transceiver Specifications
XenPak Wavelength
Connector and Cable
Type
Maximum Distance
XENPAK-10GB-LR 1310 nm SC; SMF 6.2 miles (10 km)
XENPAK-10GB-ER 1550 nm SC; SMF 24.85 miles (40 km)

Cisco 7600 Series Specifications

General

Category	Network Router
Port Density	Varies by module
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Redundancy	Power supplies
Power Supply	AC or DC, Redundant options available
Operating System	Cisco IOS XR
Management	CLI, SNMP
Form Factor	Modular
Dimensions	Varies by chassis model
Weight	Varies by chassis model and configuration
Chassis Slots	6, 9, or 13