Cisco 7600 Series Module Guide

4-2
Cisco 7600 Series Router Module Guide
OL-9392-05
Chapter 4 FlexWAN Module and Enhanced FlexWAN Modules
Ta b l e 4-1 Supported Port Adapter Groups
Group Port Adapter
ATM (with traffic shaping) PA-A6-OC3MM
PA-A6-OC3SMI
PA-A6-OC3SML
PA-A6-T3
PA-A6-E3
PA-A3-OC3MM
PA-A3-OC3SMI
PA-A3-OC3SML
PA-A3-T3
PA-A3-E3
PA-A3-I MA-T1 /E1
HSSI PA-H
PA-2H
Packet over Sonet (OC-3) PA-POS-OC 3MM
PA-POS-OC3SM I
PA-POS-OC3SM L
PA-POS-2OC3
PA-POS-1OC3
T1/E1 PA-4T+
PA-8T-V3 5
PA-8T-X2 1
PA-8T-23 2
PA-MC-2E1/120
PA-MC-2T1
PA-MC-4T1
PA-MC-8T1
PA-MC-8E1/120
PA-MC-8TE1+
PA-MC-STM-1
T3/E3 (clear-channel and channelized) PA-T3
PA-2T3
PA-T3+
PA-2T3+
PA-E3
PA-2E3
PA-MC-T3
PA-MC-2T3+
PA-MC-E3
Fast Ethernet
1 2
1. Supported on the Enhanced FlexWAN module only.
2. The option to configure the interface as Layer 2 port is not supported on the Enhanced FlexWAN
module.
PA-1FE-FX
PA-1FE-TX
PA-2FE-FX
PA-2FE-TX

Cisco 7600 Series Specifications

General

Category	Network Router
Port Density	Varies by module
Interfaces	Gigabit Ethernet, 10 Gigabit Ethernet
Redundancy	Power supplies
Power Supply	AC or DC, Redundant options available
Operating System	Cisco IOS XR
Management	CLI, SNMP
Form Factor	Modular
Dimensions	Varies by chassis model
Weight	Varies by chassis model and configuration
Chassis Slots	6, 9, or 13