7 - Document located within technology services on NTU.ac.uk
How Do I? Solution Tip
Transfer a
Call?
Step 1 During a call, press the Trnsfer
softkey. Doing so automatically puts the call
on hold.
Step 2 Dial the number or office extension
to which you want to transfer the call.
Step 3 When the call rings on the other
end, press Trnsfer again. Or, when the
party answers, announce the call and then
press Trnsfer.
If necessary, press the
Hold button to return
to the original call.
Forward All
Calls?
To forward all of your incoming calls to
another number:
Step 1 Press the CFwdAll softkey. You will
hear two beeps.
Step 2 Enter the number to which you want
to forward all of your calls. Enter the
number exactly as you would if you were
placing a call to that number.
Step 3 After you enter the number, you will
hear two beeps.
The LCD screen displays a message
confirming the number to which your calls
are being forwarded.
Note To cancel call
forwarding, press the
CfwdAll softkey.
• You can use call
forwarding to send
your incoming calls to
another Cisco IP Phone
or to a traditional
analog phone.
• If call forwarding is
active and there is no
answer at the
forwarded number (by
a person, answering
machine, or voice mail
system), the call will
be redirected to your
voice mail system
To Next Page
Loading...
Need help?
General
