5-5
Cisco Video Surveillance 8020/8030 IP Camera Reference Guide
Chapter 5 Configuration
System > Logs
To set up the custom home page, follow these steps:
Step 1 Click Custom on the left column.
Step 2 Click the field where you want to change the color on the right column.
The palette window will pop up.
Step 3 Drag the slider bar and click on the left square to select a desired color.
The selected color will be displayed in the corresponding fields and in the Preview column.
Step 4 Click Save to enable the settings.
System > Logs
This section explains how to configure the camera to send the system log to a remote server as backup.
Log server settings
To set up the remote log, follow these steps:
Step 1 Select Enable remote log.
Step 2 In the IP address text box, enter the IP address of the remote server.
Step 3 In the port text box, enter the port number of the remote server.
Step 4 When completed, click Save to enable the setting.
You can configure the camera to send the system log file to a remote server as a log backup. Before
utilizing this feature, it is suggested that the user install a log-recording tool to receive system log
messages from the camera. An example is Kiwi Syslog Daemon.
System log
The system log displays the system log in a chronological order. The system log is stored in the camera
buffer area and will be overwritten when reaching a certain limit.
2 Background color of the control area.
3 Font color of the configuration area.
4 Background color of the configuration area.
5 Preset patterns.
6 Frame color.
7 Background color of the video area.
8 Font color of the video title.
To Next Page
Loading...
