Cisco 88 Series Administration Guide

Enable and Disable Reverse Name Lookup
Before you begin
• Configure one of these directories before you can enable or disable the reverse name lookup:
• LDAP Corporate Directory
• XML Directory
• Access the phone administration web page. See Access the Phone Web Page, on page 88.
Procedure
Step 1 Select Voice > Phone.
Step 2 In the Supplementary Services area, set the Reverse Phone Lookup Serv to:
• Yes–Enable the reverse name lookup feature.
• No–Disable the reverse name lookup feature.
Step 3 Click Submit All Changes.
Step 4 Alternative method is to use the config.xml file to provision the reverse name lookup feature.
<Reverse_Phone_Lookup_Serv ua="na">Yes</Reverse_Phone_Lookup_Serv>
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
238
Cisco IP Phone Administration
Enable and Disable Reverse Name Lookup

Cisco 88 Series Specifications

General

Brand	Cisco
Model	88 Series
Category	IP Phone
Language	English