Cisco 88 Series Administration Guide

DescriptionField
Defines the delay (in seconds) that the phone waits after a change is made, and then reports
the configuration.
This field is used only when Report to Server is set to On Local Change.
Default: 60
Minimum: 10
Maximum: 900
Example XML configuration:
<Upload_Delay_On_Local_Change ua="na">
60
</Upload_Delay_On_Local_Change>
Upload Delay
On Local
Change:
Firmware Upgrade
DescriptionParameter
Allows firmware update operations independent of
resync actions.
Default: Yes
Upgrade Enable
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
291
Cisco IP Phone Troubleshooting
Firmware Upgrade

Cisco 88 Series Specifications

General

Brand	Cisco
Model	88 Series
Category	IP Phone
Language	English