Cisco 8841 Reconfiguration Guide

Cisco MPP Phones
Manual Reconfiguration Guide
** If you are having trouble flashing your device with these URLs, please contact
your technical support team for assistance. (note the / at the end of the url, it is
required)
If the station assignment process was properly completed prior to the reboot, the
device will boot into a station specific assigned/usable state. If not, the device will
boot into a default unassigned/unusable state, and will remain in this state until the
site administrator has completed the station assignment process. If this occurs,
contact your site administrator and request that station assignment be completed for
the device in question.

Cisco 8841 Specifications

General

Resolution	800 x 480 pixels
Audio	Wideband audio
Bluetooth	No
Ethernet	10/100/1000 Mbps
PoE	IEEE 802.3af compliant
Connectivity	Ethernet
Buttons	4 programmable line keys
Speakerphone	Full-duplex speakerphone
Headset Jack	Yes, RJ9
Codecs	G.711, G.722, G.729a, iLBC
Power Options	PoE
Network Interfaces	Dual Gigabit Ethernet ports
Security	Secure boot, 802.1X authentication, secure credential storage
Dimensions	40 mm
Weight	2.5 lb (1.1 kg)