DescriptionAccessibility FeatureItem
•
Toggle the Mute and Speakerphone buttons on
and off to indicate the phone state.
•
Use the Mute button to toggle the microphone on
or off. When the microphone is muted, the button
is lit.
•
Use the Speakerphone button to toggle the
speakerphone on or off. When the speakerphone
is on, the button is lit.
Visual notification of phone state2
•
Select Applications > Preferences.
•
Adjust the volume level for the phone ring. While
the handset is in the cradle and the headset and
speakerphone buttons are off, press Volume to
raise or lower the volume.
Your administrator can also change your settings.
Adjustable ringtone, pitch, and volume3
Cisco IP Phone handsets support third-party inline
amplifiers. You attach an amplifier to the handset and
cord and it sits between the handset and the IP phone.
Your phone supports these third-party inline amplifiers:
•
Clarity HA-40 Inline Amplifier for Corded Phone.
•
Plantronics EHA40 Inline Amplifier.
Inline-amplifier support (handset)4
Supports these accessibility features:
•
Hearing-aid compatible.
•
Magnetic coupling of the hearing aid.
•
Federal Communications Commission (FCC)
loudness requirements for the Americans with
Disabilities Act (ADA).
•
Section 508 loudness requirements, which are met
by using industry-standard inline handset
amplifiers.
Hearing aid compatible (HAC) handset5
Accessibility Features for the Cisco IP Phone 8800 Series
3
Accessibility Features for the Cisco IP Phone 8800 Series
Hearing-Impaired Accessibility Features
To Next Page
Loading...
Need help?
General
