Cisco 8851 Reconfiguration Guide

Cisco MPP Phones
Manual Reconfiguration Guide
** If you are having trouble flashing your device with these URLs, please contact
your technical support team for assistance. (note the / at the end of the url, it is
required)
If the station assignment process was properly completed prior to the reboot, the
device will boot into a station specific assigned/usable state. If not, the device will
boot into a default unassigned/unusable state, and will remain in this state until the
site administrator has completed the station assignment process. If this occurs,
contact your site administrator and request that station assignment be completed for
the device in question.

Cisco 8851 Specifications

General

Resolution	800 x 480 pixels
Network Interfaces	Dual Gigabit Ethernet ports
Headset Port	Yes
Audio	Wideband audio
Ethernet	10/100/1000 Mbps
USB	Yes, USB 2.0
Power	IEEE 802.3af/at Power over Ethernet (PoE)
Protocols	SIP
PoE	Yes
Codec Support	G.711, G.722, G.729, iLBC
Headset Connector	RJ9
Lines	Up to 5 lines
Dimensions	229 x 256 x 41 mm (excluding foot stand)
Weight	1.2 kg