Updated SectionRevision
Factory Reset the Phone from Phone Web Page, on page 365
Identify Phone Issues with a URL in the Phone Web Page, on
page 365
Added factory reset and pinging in phone
web page with a specific URL
Enable Conference Button with a Star Code, on page 191Added information on a star code is added
to Conference hard key from the phone
web page
Add a Logo as the Boot Display, on page 151Logo can be added as boot display
Auto Detection of Key Expansion Modules, on page 117Key expansion modue will be
auto-detected when plugged in
New and Changed Features for Firmware Release 11(0)
All new features have been added to Telephony Features for Cisco IP Phone, on page 179.
Updated SectionRevision
Configure PRT Upload, on page 211Added Configure PRT Upload URL
• #unique_128Added Problem Report tool enhancements
Configure PRT Upload, on page 211Added Problem Report tool uplaod
Enable Dial Assistance, on page 191Added enabling dial assistance
Set up Extra Line Keys, on page 192Added extra line keys support
• NAT Settings, on page 320
• SIP Settings, on page 321
• Call Feature Settings, on page 324
• Proxy and Registration, on page 327
• Subscriber Information, on page 329
• Audio Configuration, on page 332
Updated basic calls enhancements
Enable Access to Phone Web Interface, on page 170
System Configuration, on page 263
Updated web https enhancements
Call Forward, on page 154Added Call Forwarding support on Voice tab and
User tab
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
8
New and Changed Information
New and Changed Features for Firmware Release 11(0)
To Next Page
Loading...
