DescriptionParameter
Allows you to enter port number of the phone web
user interface.
Default: 80
• 80 for protocol HTTP.
• 443 for protocol HTTPS.
If you specify a port number other than the default
value for that protocol, you must include the
nondefault port number in the server URL.
Example: https://192.0.2.1:999/admin/advanced
Web Server Port
Allows you to enable or disable local access to the
phone web user interface. Select Yes or No from the
drop-down menu.
Default: Yes
Enable Web Admin Access
Allows you to enter password for the administrator.
Default: Blank
Admin Password
Allows you to enter password for the user.
Default: Blank
User Password
Allows you to make the phone menus and options that
the phone users see as read-only fields.
Default: No
Phone-UI-readonly
Allows you to restrict the menus and options that
phone users see when they use the phone interface.
Choose yes to enable this parameter and restrict
access.
Default: No
Specific parameters are then designated as “na”, “ro”,
or “rw” using provisioning files. Parameters
designated as “na” don't appear on the phone screen.
Parameters designated as “ro” aren't editable by the
user. Parameters designated as “rw” are editable by
the user.
Phone-UI-User-Mode
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
264
Cisco IP Phone Troubleshooting
System Configuration
To Next Page
Loading...
Need help?
General
