Cisco 8861 Administration Guide

DescriptionParameter
H264 HP Dynamic Payload type.
Default: 110
H264 HP Dynamic Payload
G711u codec name used in SDP.
Default: PCMU
G711u Codec Name
G711a codec name used in SDP.
Default: PCMA
G711a Codec Name
G729a codec name used in SDP.
Default: G729a
G729a Codec Name
G729b codec name used in SDP.
Default: G729b
G729b Codec Name
G722 codec name used in SDP.
Default: G722
G722 Codec Name
G722.2 codec name used in SDP.
Default: G722.2
G722.2 Codec Name
iLBC codec name used in SDP.
Default: iLBC
iLBC Codec Name
iSAC codec name used in SDP.
Default: iSAC
iSAC Codec Name
OPUS codec name used in SDP.
Default: OPUS
OPUS Codec Name
AVT codec name used in SDP.
Default: telephone-event
AVT Codec Name
NAT Support Parameters
DescriptionParameter
Enables the phone to process the received parameter
in the VIA header.
Default: No
Handle VIA received
Enables the phone to process the rport parameter in
the VIA header.
Default: No
Handle VIA rport
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
280
Cisco IP Phone Troubleshooting
NAT Support Parameters

Cisco 8861 Specifications

General

Resolution	800 x 480 pixels
Audio	Wideband audio
Ethernet Ports	2 x 10/100/1000
Speakerphone	Full-duplex
Display	5-inch color display
Lines	5
PoE	Yes (802.3af)
Protocols	SIP, SDP, SRTP
Wi-Fi	802.11a/b/g/n/ac
Headset Jack	Yes
Codecs	G.711, G.722, G.729, iLBC
USB Port	2 x USB 2.0
USB Ports	2 x USB 2.0
Supported Languages	Multiple (English, French, Spanish, etc.)