Cisco 8861 Administration Guide

DescriptionField
Defines the delay (in seconds) that the phone waits after a change is made, and then reports
the configuration.
This field is used only when Report to Server is set to On Local Change.
Default: 60
Minimum: 10
Maximum: 900
Example XML configuration:
<Upload_Delay_On_Local_Change ua="na">
60
</Upload_Delay_On_Local_Change>
Upload Delay
On Local
Change:
Firmware Upgrade
DescriptionParameter
Allows firmware update operations independent of
resync actions.
Default: Yes
Upgrade Enable
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
291
Cisco IP Phone Troubleshooting
Firmware Upgrade

Cisco 8861 Specifications

General

Resolution	800 x 480 pixels
Audio	Wideband audio
Ethernet Ports	2 x 10/100/1000
Speakerphone	Full-duplex
Display	5-inch color display
Lines	5
PoE	Yes (802.3af)
Protocols	SIP, SDP, SRTP
Wi-Fi	802.11a/b/g/n/ac
Headset Jack	Yes
Codecs	G.711, G.722, G.729, iLBC
USB Port	2 x USB 2.0
USB Ports	2 x USB 2.0
Supported Languages	Multiple (English, French, Spanish, etc.)