DescriptionParameter
The star code used for picking up a call from the call
park.
Defaults to *39.
Call Unpark Code
The star code used for picking up a group call.
Defaults to *37.
Group Call Pickup Code
For executive assistants: Initiates a call on behalf of
an executive from the user's (assistant's) extension.
Default: #64
Exec Assistant Call Initiate Code
For executives who have assistants: Activates call
filtering. When call filtering is on, assistants receive
incoming calls for executives.
Default: #61
Exec Call Filter Act Code
For executives who have assistants: Deactivates call
filtering.
Default: #62
Exec Call Filter Deact Code
For executive assistants: Transfers an ongoing call
from the user (assistant) to the executive.
Default: #63
Exec Assistant Call Push Code
For executives who have assistants: Transfers an
ongoing call from an assistant to the user (executive).
For executive assistants: Transfers an ongoing call
from the executive to the user (assistant).
Default: *11
Exec Call Retrieve Code
For executives who have assistants: Joins the user
(executive) to an ongoing call with an assistant.
For executive assistants: Joins the user (assistant) to
an ongoing call with an executive.
Default: *15
Exec Call Bridge Code
If you change any of the service activation codes used by executives or assistants, you must update
the corresponding settings in BroadWorks.
Important
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
300
Cisco IP Phone Troubleshooting
Vertical Service Activation Codes
To Next Page
Loading...
Need help?
General
