DescriptionParameter
Specifies whether to authenticate the invite before
auto answering a page.
Default: No
Auth Page
Type of ring heard. Choose from No Ring or 1 through
10.
Ring options are Sunlight, Chirp 1, Chirp 2, Delight,
Evolve, Mellow, Mischief, Reflections, Ringer,
Ascent, Are you there, and Chime.
Default Ring
Identifies the Realm part of the Auth that is accepted
when the Auth Page parameter is set to Yes. This
parameter accepts alphanumeric characters.
Auth Page Realm
URL used to join a conference call, generally in the
form of the word conference or user@IPaddress:port.
Conference Bridge URL
Identifies the password used when the Auth Page
parameter is set to Yes. This parameter accepts
alphanumeric characters.
Auth Page Password
Identifies the voice mailbox number/ID for the phone.Mailbox ID
Identifies the SpecVM server for the phone, generally
the IP address, and port number of the VM server.
Voice Mail Server
The expiration time, in seconds, of a subscription to
a voice mail server.
Voice Mail Subscribe Interval
Determines the behavior of the phone when a page
call arrives.
Auto Ans Page On Active Call
Enable the synchronization of settings between the
line and the server if necessary.
Feature Key Sync must be enabled for lines that are
configured for the following functions or users:
• Call forward all
• DND
• Executives and assistants
Feature Key Sync
BroadSoft server-only feature. If call park is enabled
on the server or on any of the programmable line keys,
you need to enable this field for call park notification
to work.
Default: No
Call Park Monitor Enable
Cisco IP Phone 8800 Series Multiplatform Phones Administration Guide
325
Cisco IP Phone Troubleshooting
Call Feature Settings
To Next Page
Loading...
Need help?
General
