Cisco 8861 Firmware Migration Master Guide

© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Internal Information. Page 1 of 30
Convert between Enterprise Firmware and Multiplatform Firmware
for Cisco IP Phone 7800 and 8800 Series
Last Updated: April-2019
Contents
Firmware Migration (Overview) ....................................................................................................................... 2
Firmware Migration FAQ (MUST READ) ........................................................................................................... 6
Unified CM-Based Migration Method (Enterprise to MPP) ............................................................................. 9
Unified CM-Based Migration Method (MPP to Enterprise) ........................................................................... 13
Appendix A: Flex plan - How to order licenses via Product Upgrade Tool (PUT) ........................................... 16
Appendix B: How to generate licenses for firmware conversion ................................................................... 21
Appendix C: Bulk Provisioning (Unified CM-Based Method) .......................................................................... 26
Appendix D: Overview of the Cisco IP Phone MPP GUI .................................................................................. 27

Cisco 8861 Specifications

General

Resolution	800 x 480 pixels
Audio	Wideband audio
Ethernet Ports	2 x 10/100/1000
Speakerphone	Full-duplex
Display	5-inch color display
Lines	5
PoE	Yes (802.3af)
Protocols	SIP, SDP, SRTP
Wi-Fi	802.11a/b/g/n/ac
Headset Jack	Yes
Codecs	G.711, G.722, G.729, iLBC
USB Port	2 x USB 2.0
USB Ports	2 x USB 2.0
Supported Languages	Multiple (English, French, Spanish, etc.)